home | press releases | recruitment | enquiries    
 
Who are Able

Property Developments

Offshore

Ship Recycling

Demolition/Reclamation

Port Facilities
 

Billingham Reach Industrial Estate (BRIE)
Able Clarence Port
Able Humber Port
Able Middlesbrough Port
Able Seaton Port
Able Seaton Port Dry Dock

 

Waste Management

Sales

Wanted

Tenders

Photos

Links

 

 

 

 

 

SEARCH

go 

 

 

 

Able Seaton Port Dry Dock

Able Seaton Port has what is probably the largest Dry Docking area available in the World - it is located on the River Tees, in the North East of England.

The facility is suitable for a wide range of activities including:

  • Construction of jackets and gravity based structures for offshore oil and gas activities
  • Construction of circa 100 gravity based foundations for the offshore wind sector
  • Ship/Vessel building/repair/maintenance
  • Oil Rig (Jack-Up and Semi-Sub) building/repair/maintenance

The facility can accommodate:

  • It can receive both of the UK’s current new build aircraft carriers
  • It can receive two of the World’s largest heavy lift vessels
  • It can receive x no submarines at the same time
  • Multiple vessels for recycling.

Location:

  • 54°38’00” North 1°11’28.73” West
  • On the Seaton Channel - a branch off the River Tees, Teesside, United Kingdom
  • 1 nautical mile from the Tees Turning Circle (500m diameter, -14m LAT) and 4.5 nautical miles from the River Tees Fairway Buoy
  • Distance from open sea: 2 nautical miles

Dimensions:

  • Dry Dock Entrance: 125m
  • Area: 10 hectares (100,000m2); 25 acres
  • Maximum water depth of water over the cill – 12.6m CD
  • Dry Dock Depth – 12.15m CD
  • Maximum width of Dry Dock: 260m
  • Length of Dry Dock: 355m (can be increased to 450m)

Marine Data:

  • There are no air draft restrictions from ASP to the North Sea.
  • ASP is only 2 nautical miles from open sea.
  • Seaton Channel 120m dredged channel width (0.65 nautical miles long) is currently dredged to -6m CD but can be increased to -9.5m CD if required  (approvals and permissions are in place).
  • Mean High Water Spring is 5.5m.
  • Mean Low Water Spring MLWS is 0.9m CD,
  • The tidal range is 4.6m between MHWS and MLWS.
  • Maximum channel water depth at MHWS 15.0m.
  • Minimum channel water depth at MLWS 10.4 m.
  • Maximum water depth at Quays 10 and 11 at MHWS is 20m.
  • Minimum channel water depth at MLWS is 15.m
  • Current (Channel) = 0.25 knots (0.13m/second)
  • Visibility for divers is 2m+.
  • Dry Dock Holding Basin: 290m x 200m at -9.5m CD.

 

 

For additional information or enquires, please contact:-
Neil Etherington or Karen jewers
Able UK Ltd
Able House, Billingham Reach Industrial Estate, Billingham, Teesside TS23 1PX
Tel: 01642-806080   Fax: 01642-560331   Email: info@ableuk.com

 

 

Telephone: +44(0)1642 806080   Fax: +44(0)1642 655655   Email: info@ableuk.com
www.ableuk.com       www.ableshiprecycling.com